INOX MX9 No Chukka Chain Lube is a superior grade, high speed, extreme pressure chain lube formulated with special tackifiers, coagulants, anti-corrosion and water proofing compounds to make it stay on the chain, hence the name 'No Chukka Chain Lube'.

INOX MX9

 

Buy Inox online

FIND A LOCAL RETAILER

Inox Retailer/Distributor inquiries

Contact Inox Sales Representative

Material Safety Data Sheets

Home

 

Inox

Inox Products

MX2 Battery Conditioner

MX3 lubricant

MX4 Lanolin lubricant

MX4 Lanolin grease

MX5 Inox Plus

MX6 No melt grease

MX7 Extreme pressure lube

MX8 High temp grease

MX9 High speed chain lube

MX11 Chain & brake cleaner

MX12 PTFE supa glide

 

MSDS USA        MSDS AU

INOX MX9 NO CHUKKA CHAIN LUBE IS A PREMIUM EXTREME PRESSURE - HIGH SPEED CHAIN LUBE WITH PTFE THAT REALLY STICKS TO THE CHAIN

INOX-mx9 No Chukka Chain Lube is a superior grade, high speed, extreme pressure chain lube formulated with special tackifiers, coagulants, anti-corrosion and water proofing compounds to make it stay on the chain, hence the name 'No Chukka Chain Lube'.

INOX-mx9 No Chukka Chain Lube contains the extreme pressure friction modifier PTFE (polytetrafluoroethylene) which gives increased lubrication, reducing wear and also helps in reducing operating temperatures.

INOX-mx9 No Chukka Chain Lube is highly resistant to salt, chemicals, water wash out and drying.

Because of its' heavy duty, highly tackified mass and extreme pressure lubricating ability, INOX-mx9 No Chukka Chain lube can be used in other lubrication applications, such as small ball and pin bearings, bearing slides, metal bushes, winch cables, etc.

DIRECTIONS FOR USE
It is recommended to clean the chain first by spraying it with INOX-mx11 Chain & Brake Clean. This will clean the chain and leave it dry in a few minutes with no residue. Next spray INOX-9 No Chukka Chain Lube directly onto the chain. NB. Using the extension tube attached to the spray button will give the best results for accuracy and concentration and reduces the problems with over spray. Allow a few minutes (3 to 10 mins depending on the ambient temperature) for chain lube to penetrate the chain linkages and for the solvent carrier and propellant gas to evaporate.


INOX-mx9 No Chukka Chain Lube
will not harm motorcycle chain 'O' rings

INOX-mx9 No Chukka Chain Lube
is available in 150 and 300 gram aerosol cans.

APPLICATIONS

  Motorcycle, bicycle and go-kart chains
  Forklift hoist chains
  Vehicle hoists and endless chain hoists
  Chain and sprocket drives for all farm and mining machinery,
        industrial and commercial equipment
  P T O's
  Winch cables
  Metal bushes
   Bearing slides, small pin, ball and roller bearings

MOTORCYCLES: To get the best life out of motorcycle chains, it is recommended to clean the chain after every third or fourth application of INOX-mx9 No Chukka Chain Lube.
For the best results, it is recommended to apply to a warm chain.

INOX-mx9 No Chukka Chain Lube
will not harm motorcycle chain 'O' rings

 

MSDS USA        MSDS AU

Inox Lubricant Inox MX2  Inox MX3  Inox MX4  Inox MX5  Inox MX6  Inox MX7  Inox MX9  Inox MX11  Inox MX12